
Framing, Siding & Exterior Painting
Framing, Siding & Exterior Painting in North Dallas — Rough Framing, Rot Repair & Full-Home Paint
A-Legacy Construction handles the structural and finish envelope of North Dallas homes — rough framing for additions and interior wall changes, siding and trim repair or replacement, and interior and exterior painting done the right way.
See the difference
Before & after
Rotted trim isn't just cosmetic and framing shortcuts aren't just invisible — both let water and load reach places they shouldn't. Once caulk lines fail around windows and siding butt-joints, water gets behind the wall, soaks the sheathing and eventually reaches framing and insulation. Paint over failing prep peels within a season. We frame square, we open walls to fix what caused the rot, and we prep every surface before a drop of paint hits it — so the finished result actually lasts.
- Rough framing for additions, interior wall changes, headers and beam pockets
- James Hardie® fiber-cement and LP® SmartSide® siding and trim installation
- Full rot investigation — we open the wall and repair sheathing, not just skin over it
- House wrap, flashing and Z-metal installed to manufacturer spec
- Interior painting: walls, ceilings, trim, doors and cabinets
- Exterior painting: siding, trim, soffits, fascia, doors and shutters — corner-to-corner
- Backer rod and high-grade polyurethane caulk on every exterior joint
After
BeforeOverview
How A-Legacy handles framing, siding & exterior painting
A-Legacy Construction handles the structural and finish envelope of North Dallas homes — rough framing for additions and interior wall changes, siding and trim repair or replacement, and interior and exterior painting done the right way.
We handle the entire scope: framing changes, careful tear-out of damaged trim and siding, sheathing repair, house-wrap detailing, new trim or siding, caulk, prime and two coats of paint — inside or out — so walls are structurally sound, fully sealed and matched to the rest of your home.
Our process
Step-by-step, no surprises
Every framing, siding & exterior painting project follows the same disciplined sequence — so you always know what's happening next.
1. On-site inspection
Angel walks every wall or elevation, probes suspect trim and siding for hidden rot, checks framing conditions, and photographs what needs to be opened up.
2. Written scope & quote
You get an itemized quote separating framing, siding, sheathing repair, house-wrap, flashing, caulk, prep and paint — so the scope is clear before we start.
3. Framing & tear-out
Framing changes are done first — new studs, headers or blocking. Damaged trim and siding are removed cleanly, cutting back to sound sheathing wherever rot is found.
4. Sheathing, wrap & flashing
Rotted sheathing is replaced. House wrap is patched or replaced and lapped correctly. Head flashing and Z-metal go in above every horizontal joint and window.
5. New siding & trim
New James Hardie® or LP® SmartSide® material is installed to manufacturer nailing patterns and joint spacing. Corners, window casings and frieze boards are set true and level.
6. Surface prep, prime & paint
Interior or exterior: surfaces are scraped, sanded, patched and cleaned. Bare material is primed. Two coats of premium acrylic paint are applied to your chosen color.
7. Cleanup & walk-through
Debris is hauled off, magnets are swept for nails outside, drop cloths and tape come up cleanly inside, and we walk every wall or elevation with you before final invoice.
What's included in every framing, siding & exterior painting project
- Free on-site inspection and moisture check
- Written itemized scope of framing, siding, trim and paint
- Framing changes and sheathing repair as needed
- House-wrap, flashing and Z-metal per manufacturer spec
- New siding and trim, caulk, prime and two coats of paint
- Interior surface prep, patching, priming and painting
- Debris haul-off and daily cleanup
- Written workmanship warranty
Materials & manufacturers we trust
- Kiln-dried #2 SPF and pressure-treated framing lumber
- James Hardie® HardiePlank® and HardieTrim®
- LP® SmartSide® engineered wood siding and trim
- PVC / composite trim for high-moisture areas
- Tyvek® or equivalent house wrap
- Sherwin-Williams® and Benjamin Moore® interior & exterior acrylic paint
- OSI Quad® or NP1® polyurethane exterior caulk
Typical timeline
Interior painting (one to three rooms): 2–5 days. Targeted rot and trim repairs: 1–2 days. Framing changes for a wall opening or beam: 1–3 days plus inspection. Full-elevation siding replacement: 4–7 days. Full-home re-side and repaint: 2–4 weeks depending on square footage and prep.
Honest pricing guidance
Interior painting typically runs $2.50–$5 per square foot of wall and ceiling, or $400–$900 per average room including prep and two coats. Exterior painting runs $2.75–$5.50 per square foot of wall area corner-to-corner. Trim repair typically runs $250–$900 per window or door. Section siding replacement runs $12–$22 per square foot installed and painted. Framing is priced per scope after on-site measurement.
Service area
Framing, Siding & Exterior Painting across North Dallas
A-Legacy Construction & Property Services proudly serves families and property owners across the following North Dallas communities:
- Frisco, TX
- Plano, TX
- McKinney, TX
- Allen, TX
- Prosper, TX
- Little Elm, TX
- The Colony, TX
- Celina, TX
- Carrollton, TX
- Richardson, TX
Frequently asked
Framing, Siding & Exterior Painting questions from North Dallas homeowners
Do you do interior painting as well as exterior?+
Yes — we handle interior painting (walls, ceilings, trim, doors and cabinets) and exterior painting (siding, trim, soffits, fascia, doors and shutters) with the same prep discipline: surfaces scraped and sanded, patched, cleaned, primed where needed, then two coats of premium acrylic paint.
Do you handle rough framing for additions and interior wall changes?+
Yes. We frame new walls, headers, beam pockets and additions to code. For load-bearing changes we coordinate a structural engineer, pull the permit, and schedule inspections.
Can you match my existing siding and paint color?+
Yes — James Hardie® and LP® SmartSide® are widely stocked and we color-match your existing paint at Sherwin-Williams® or Benjamin Moore® so the repair blends in.
Do you work with insurance claims for storm damage?+
Yes. We provide detailed line-item estimates that align with insurance scope sheets and can meet your adjuster on-site.
Ready to get started?
Get a free, itemized framing, siding & exterior painting quote
Angel will personally walk your property, understand your goals, and put a clear, written estimate in your hands — no pressure, no gimmicks.
